Tag: iron sulphide scale

Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Czasopismo : Advances in Materials Science
Tytuł artykułu : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Autorzy :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstrakty : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Słowa kluczowe : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Wydawnictwo : Politechnika Gdańska
Rocznik : 2001
Numer : Vol. 1, nr 1(1)
Strony : 46 – 52
Bibliografia :
DOI :
Cytuj : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : 46 – 52

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Czasopismo : Advances in Materials Science
Tytuł artykułu : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Autorzy :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstrakty : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Słowa kluczowe : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Wydawnictwo : Politechnika Gdańska
Rocznik : 2001
Numer : Vol. 1, nr 1(1)
Strony : –
Bibliografia :
DOI :
Cytuj : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]

Journal : Advances in Materials Science
Article : Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment

Authors :
Davies, H.A.
Department of Engineering Materials, University of Sheffield, United Kingdom,
Pomogailo, A.D.
Institute of Problem of Chemical Physics, Russian Academy of Sciences Cher-nogolovka, Russia,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Gireń, B.G.
Institute of Fluid-Flow Machinery Polish Academy of Science, Poland,
Hucińska, J.
Faculty of Mechanical Engineering, Technical University of Gdańsk, Poland,
Abstract : Characteristics of sulphide corrosion products in K18 carbon steel after 11 years of service in a low-sulphur refinery furnace environment have been examined in order to better understand the mechanism of sulphur-related damage to the steel. Optical microscope and scanning/transmission electron microscopes techniques have been involved in the study. Four types of the corrosion products of different morphology and origin have been presented: (1) iron sulphide scale on the steel surface, (2) sulphur-rich particles at ferrite grain boundaries, (3) degraded sulphur-enriched cementite particles at other ferrite grain boundaries and similar particles within pear-lite grains, and (4) irregular iron sulphide inclusions in the subsurface metal layer that were not-related to the boundaries of the grains.

Keywords : sulphide corrosion, steel test, carbon steel, sulphur-related damage, iron sulphide scale,
Publishing house : Politechnika Gdańska
Publication date : 2001
Number : Vol. 1, nr 1(1)
Page : –

Bibliography
:
DOI :
Qute : Davies, H.A. ,Pomogailo, A.D. ,Gireń, B.G. ,Gireń, B.G. ,Hucińska, J. ,Hucińska, J. , Sulphide corrosion products in carbon steel after prolonged service in low-sulphur refinery environment. Advances in Materials Science Vol. 1, nr 1(1)/2001
[Top]